Hallo zusammen,

seite heute ca. 11:15 war Umschaltung und Aufsync beendet.

Max:    Upstream rate = 49855 Kbps, Downstream rate = 334669 Kbps
Bearer: 0, Upstream rate = 42460 Kbps, Downstream rate = 265469 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile BrcmPriv1
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        11.3            14.1
Attn(dB):        10.4            0.0
Pwr(dBm):        12.2           -4.1

Downstream    Upstream
Line attenuation (dB):      10,4        0,0
Signal attenuation (dB):    Not monitored        
Connection speed (kbps):    265469        42460
Interleave depth:           16        4
INP:                        29,00        30,00
G.INP:                      Enabled        Enabled
Vectoring status:           3 (VECT_RUNNING)        

RSCorr/RS (%):              0,0005        0,0001
RSUnCorr/RS (%):            0,0000        0,0000
ES/hour:                    0        0

Nun habe ich aber immer noch BNG -seitig die alten Shaper-Werte - passiert da bis 21.00 Uhr noch was?