‎Speed Home Wifi - Can't access the user interface (Benutzeroberfläche)

Telekom hilft Community

Telekom Business Community

Privatkunden

Telekom Shops

Kontakt

Gelöst

Speed Home Wifi - Can't access the user interface (Benutzeroberfläche)

vor 3 Jahren

Anyone want to help can reply in German. Sorry I had to write it in English.

I installed my Speed Home Wifi mesh router via an ethernet cable but I can't reach the user interface of the Speed Home Wifi device to change the name of the WLAN signal.
I tried reaching through http://speedhomewifi and mac adress-speedhomewifi etc. It did't work.
In my router screen, I see that the IP adress of the router is not correctly assigned. It says 192.168.0.109 as IPv4 address in Mesh Devices screen.

connected devices.jpg

Also our other devices have problems in getting a working IP adress too. I connected my PC via LAN cable and my pc couldn't get an ip adress, it was something like 192.168.0.xxx. So I had to set a static IP adress from network settings on my devices to be able to access the internet.
How can we fix it?

Main router : Speedport Smart 4

1004

vor 3 Jahren
Speedport Smart 4 can work normally as Mesh-Base (Mesh-Master) of the Speedhome WiFi. Then the Speedhome WiFi are only Mesh-Slaves.

Have you tried to change the Wlan- Name ( SSID ) in the Wlan- Konfiguration of the Speedport Smart 4?

I hope, you didn't make the Wlan of the Speedport off(out), because it is the Mesh-Master. And if you only let the 2.4 GHz Wlan of the Speedport work: the Speedhome WiFi normally need the 5 GHz.
14
Antwort
von
vor 3 Jahren
@profiler1333

you can change the Speedport Adress in the Speedport Menü to 192.168.0.1.
Antwort
von
vor 3 Jahren
Thank you, it solved the ip problem.
Antwort
von
vor 3 Jahren
@profiler1333 schrieb:
DHCP doesn't work correctly. The speedport smart ip is 192.168.2.1 . But if the ip is on Automatic setting, it gives me an ip of 192.168.0.xxx and I can't connect to some websites, some websites work, some don't.

That is very strange. Your first screenshot shows that the Speed Home WiFi has received an IP address of 192.168.0.109 via DHCP. Your last screenshot shows that the Smart 4 has a DHCP range of 192.168.2.xxx. You have not changed anything in the settings?

Please reset the Smart 4 and the Speed Home WiFi to factory settings and reconfigure them.

Does your Smart 4 have the current firmware 0101xx3.0.002.2?

Greetings Ulrich
Uneingeloggter Nutzer
Antwort
von
Akzeptierte Lösung
akzeptiert von
vor 3 Jahren
@profiler1333

you can change the Speedport Adress in the Speedport Menü to 192.168.0.1.
0
vor 2 Jahren
Good evening @profiler1333 welcome to our community and sorry for the late response!

I'm glad to hear, that you already fixed that issue with the help in this thread. If you need any further support, please let us know.

Kind regards Sven Ö.
0