Guten Tag,

Unsere Leitung wurde am 17.05 geschaltet und seitdem habe ich sporadisch Probleme mit DSL Abbrüchen z.b. bei Belastung (manchmal aber auch nicht)  - und kann leider nicht ausmachen, ob es am Router liegt oder an der Leitung.  Die Verbindung läuft keine 24 bis 48 Stunden stabil.

Ein paar Informationen:

MagentaZuhause XL - vDSL 250/40  - angeschlossen per Telefonkabel   TAE => DSL Port

Router (und auch so konfiguriert) Technicolor DGA 4132 mit OpenWRT, Software AGTHP_2.3.4 + Ansuel GUI 9.6.96

Direkt verbunden per Lan Kabel mit dem Rechner

kein Powerline /Devolo o.ä.

DSL Stats:

/etc/config/network

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'
	option ipv6 '0'

config globals 'globals'
	option default_ps '0'
	option ula_prefix 'none'

config interface 'lan'
	option type 'bridge'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option force_link '0'
	option ifname 'eth0 eth1 eth2 eth3 eth5'
	option rpfilter '1'
	list pppoerelay ''
	option ip6assign '0'
	option ipv6 '0'

config switch
	option name 'bcmsw'
	option reset '1'
	option enable_vlan '0'
	option jumbo '0'

config interface 'wlnet_b_24'
	option proto 'static'
	option ip6assign '64'
	option ip6hint '1'
	option netmask '255.255.255.128'
	option ipaddr '192.168.168.1'
	option ifname 'wl0_1'
	option force_link '0'
	option name 'Ospiti-TIM-20185169'
	option ipv6 '0'

config interface 'wlnet_b_5'
	option proto 'static'
	option ip6assign '64'
	option ip6hint '2'
	option netmask '255.255.255.128'
	option ipaddr '192.168.168.129'
	option ifname 'wl1_1'
	option force_link '0'
	option name 'Ospiti-TIM-20185169'
	option ipv6 '0'

config device 'wlnet_b_5eth5'
	option type '8021q'
	option name 'wl1_1'
	option enabled '1'
	option ifname 'eth5'
	option vid '3'
	option ipv6 '1'

config interface 'public_lan'
	option ifname '@lan'
	option proto 'static'
	option ipaddr '0.0.0.0'
	option netmask '0.0.0.0'
	option auto '1'
	option disabled_info 'proto=static,ip=0.0.0.0,mask=255.255.255.248'
	option ipv6 '0'

config device 'waneth4'
	option type '8021q'
	option name 'waneth4'
	option macaddr 'A4:91:B1:34:00:50'
	option ifname 'eth4'
	option vid '835'
	option ipv6 '0'

config device 'wanptm0'
	option type '8021q'
	option name 'wanptm0'
	option macaddr 'A4:91:B1:34:00:50'
	option ifname 'ptm0'
	option vid '7'
	option ipv6 '0'

config interface 'wan'
	option auto '1'
	option proto 'pppoe'
	option demand '0'
	option macaddr 'A4:91:B1:34:00:50'
	option keepalive_adaptive '0'
	option dns_metric '0'
	option ifname 'wanptm0'
	option metric '0'
	option password '******'
	option peerdns '1'
	option ipv6 '0'
	option username '******'

config config 'config'
	option wan_mode 'pppoe'

config interface 'wwan'
	option proto 'mobiled'
	option session_id '0'
	option profile '1'
	option iface_464xlat '0'
	option auto '1'

config interface 'wan6'
	option ifname '@wan'
	option proto 'dhcpv6'
	option reqopts '12 21 22 23 24 25 31 56 64 67'
	option noslaaconly '1'
	option iface_464xlat '0'
	option defaultreqopts '0'
	option dns_metric '20'
	option auto '0'

config device 'iptveth4'
	option type '8021q'
	option name 'iptveth4'
	option macaddr 'A4:91:B1:34:00:50'
	option ifname 'eth4'
	option vid '836'
	option ipv6 '0'
	option igmpversion '2'

config device 'iptvptm0'
	option type '8021q'
	option name 'iptvptm0'
	option macaddr 'A4:91:B1:34:00:50'
	option ifname 'ptm0'
	option vid '836'
	option ipv6 '0'
	option igmpversion '2'

config interface 'iptv'
	option proto 'static'
	option ipaddr '10.10.10.2'
	option netmask '255.255.255.252'
	option igmpversion '2'
	option auto '1'
	option ifname 'iptvptm0'

config interface 'sfp'
	option proto 'static'
	option ifname 'eth4'
	option ipaddr '192.168.2.2'
	option netmask '255.255.255.0'

config device 'voipeth4'
	option enabled '0'
	option type '8021q'
	option name 'voipeth4'
	option macaddr 'A4:91:B1:34:00:51'
	option ifname 'eth4'
	option vid '84'
	option mtu '1400'
	option ipv6 '0'

config interface 'voip'
	option auto '0'
	option proto 'dhcp'
	option ifname '<set by script>'
	option macaddr 'A4:91:B1:34:00:51'
	option ipv6 '0'
	option peerdns '1'
	option reqopts '1 3 6 15 26 33 42 51 121 249'
	option vendorid 'DGA4132_CP1750RALS2'
	option ip4table 'voip'
	option defaultroute '1'
	option dnsset 'voip'

config interface 'ipoe'
	option proto 'dhcp'
	option metric '1'
	option reqopts '1 3 6 43 51 58 59'
	option release '1'
	option neighreachabletime '1200000'
	option neighgcstaletime '2400'
	option ipv6 '1'

Hätte gerne testweise mal den Router mit dem RJ45 Adapter + RJ45 Kabel an den WAN Port angeschlossen, aber dann stellt der Router keine Verbindung zum Netz her.   Vielleicht fällt jemand was auf, was hier nicht stimmt.   Komme hier mit meinen bescheidenen Kenntnissen nicht weiter.

Danke und Liebe Grüße