Solved
Hybrid LTE Anteil funktioniert nicht
4 years ago
(Entschuldigung, dass ich auf Englisch schreibe)
Hello,
Since 10 days I have a Speedport Hybrid, but the LTE part never worked. It connects through DSL just fine, but the ' LTE ' led on the router is off, even though I have 3 out of 5 bars. I bought an external antenna because I thought the signal strength was the problem, but I don't think it is. In the system logs of the router it says (many times):
Hybrid Server nicht über LTE erreichbar (HA001)
It also gives the following details about the LTE signal strength
LTE -ZellInfo: PLMN = 26201, CellID = 36069126, Band = LTE2600, RSRP = -94dBm, RSRQ = -9dB (LT004)
LTE -ZellInfo: PLMN = 26201, CellID = 36069126, Band = LTE2600, RSRP = -94dBm, RSRQ = -9dB (LT004)
In the hidden engineering menu at http://speedport.ip/engineer/html/lteinfo.html I see
Device Status | Attached |
SIM Card Status | SIM OK |
Antenna Mode | Antenna set to external |
Physical Cell ID | 97 |
Cell ID | 36069126 |
RSRP | -94 |
RSRQ | -9 |
Service Status | Effective service |
TAC | 1494 |
Dedicated EPS Bearer | Deactive |
LTE tunnel ( LTE :tun) | Down |
DSL tunnel (DSL:tun) | Down |
Bonding (Bond) | Down |
On http://speedport.ip/engineer/html/bonding_client.html?lang=en it says (under " LTE Info")
State | 2 |
TimeOutCnt | 0 |
Intf | rmnet0 |
Local Addr | 2a01:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:9208 |
Remote Addr | 2003:xxxx:xxxx::1 |
And finally on http://speedport.ip/engineer/html/interface.html?lang=en (under "Line status") it says
Interface | Physical(mac) address | Status | Media | Speed |
br0 | Up | Ethernet | 10M/100M/1000M | |
eth0.2 | Up | Ethernet | 10M/100M/1000M | |
eth0.3 | Down | Ethernet | 10M/100M/1000M | |
eth0.4 | Down | Ethernet | 10M/100M/1000M | |
eth0.5 | Down | Ethernet | 10M/100M/1000M | |
WIFI-2. 4G | Up | WLAN | 300Mbps | |
WIFI- 5G | Up | WLAN | 1300Mbps | |
nas_p1_4.8 | Up | DSL | DownStream:132134kbps UpStream:39187kbps | |
ppp256 | Up | DSL | DownStream:132134kbps UpStream:39187kbps | |
rmnet0 | Up | LTE | LTE CAT4 |
Interface | MTU | Out_Frames | Out_Errors | In_Frames | In_Errors | Collisions |
br0 | 1500 | 21863 | 0 | 29886 | 0 | 0 |
eth0.2 | 1500 | 2455 | 0 | 66 | 0 | 0 |
eth0.3 | 1500 | 0 | 0 | 0 | 0 | 0 |
eth0.4 | 1500 | 0 | 0 | 0 | 0 | 0 |
eth0.5 | 1500 | 0 | 0 | 0 | 0 | 0 |
WIFI-2. 4G | 1500 | 9508 | 0 | 9414 | 0 | 0 |
WIFI- 5G | 1500 | 20912 | 0 | 15458 | 0 | 0 |
nas_p1_4.8 | 1500 | 10 | 0 | 0 | 0 | 0 |
ppp256 | 1492 | 16894 | 0 | 19203 | 0 | 0 |
rmnet0 | 1436 | 426 | 0 | 169 | 0 | 0 |
My conclusion is that the LTE interface is up and that signal strength is (should be) sufficient, but that it somehow doesn't work anyway? What can I do to resolve this?
1177
22
This could help you too
Solved
684
0
4
3 years ago
349
0
3
3 years ago
136
0
2
4 years ago
-94 dBM RSRP is plenty and -9 dB RSRQ is "not great, not terrible", this should result in a noticeable boost from LTE .
The fact that all tunnels are down makes me wonder if your Hybrid plan was correctly booked and engaged. This should be checked by a member of the support team (which I am not), so I will make the team aware of this thread.
One question: Have you been issued the dedicated SIM card for the Hybrid Access service? Do the order confirmation ("Auftragsbestätigung") you received from DT and your monthy invoice explicitly mention the Hybrid service? Can you tell what the exact name of the booked plan is?
13
Answer
from
4 years ago
Hallo @Waage1969 ,
Thank you for your reply, that's very disappointing for me but maybe there is another way for me to use the LTE and the DSL together. Thanks again,
Ed
Answer
from
4 years ago
Hello @Ed6
i give the Teamies of the @Telekom hilft Team a second information about your situation / problem.
We will see, i hope it will be end good for you 👍
Greats
Waage1969
(sorry for my bad old schhool english 🤔 )
Answer
from
4 years ago
Hello @Waage1969 ,
Thank you so much! I hope that they will figure something out. And sorry again for posting this in English, but I thought I couldn't explain everything in German. Your English is great!
Best,
Ed
Unlogged in user
Answer
from
4 years ago
No problem, but my school English is so rusty that I use a translator. I hope the translator translates understandably;)
As the other users have already written, LTE backup is only possible in combination with a Speedport Pro or Speedport Pro Plus.
The other hybrid option, which combines LTE and DSL, is unfortunately not available at your address.
I can't make any promises, but because of the hybrid availability, I am now initiating research.
If the availability remains negative, you only have the option to switch to the Speedport Pro (Plus).
But I will get back to you here beforehand.
Best regards and see you soon
Jonas
1
Answer
from
4 years ago
Thank you Jonas, I appreciate you looking into it.
All the best,
Ed
Unlogged in user
Answer
from
4 years ago
Viele Grüße
Jonas J.
0
4 years ago
Viele Grüße
Jonas J.
1
Answer
from
4 years ago
Thank you Jonas! I've added my phone number to my profile. Talk to you on Monday!
Unlogged in user
Answer
from
Accepted Solution
accepted by
4 years ago
As discussed, after consulting with my colleague, I have ordered the hybrid option for you. Tomorrow is the day.
Please test if everything worked and give me feedback afterwards.
Viele Grüße
Jonas J.
2
Answer
from
4 years ago
Hi Jonas,
sorry that it took so long to get back to you. I rebooted the router a few times in the past week or so but the LTE light never switched on. I assumed there was a delay in enabling the hybrid option or something, so I waited until I the LTE light switched on (after reboot). It never did. Still doesn't.
Only today I had some time to log into the router to see what was actually happening, and it turns out that everything is nevertheless now working as expected! I can remove the DSL cable to simulate a cable failure, and even if I do that, my internet connection is still functional - but now through LTE ! Amazing. The error messages in the system log have also disappeared. Thank you so much for your help in getting this sorted.
All the best,
Ed
Answer
from
4 years ago
Nice that I could help you. I wish you all the best.
Best wishes
Jonas J.
Unlogged in user
Answer
from
Unlogged in user
Ask
from